It doesn’t matter if you feel you can’t see properly at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your vehicle to blame – your low beams. Even though this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this common realignment, and in this article content, we will find out how to adjust the low beam lights of your Infiniti QX50? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Infiniti QX50.
Why adjust the low beam lights of your Infiniti QX50?
So let’s start our article content with the benefit of adjusting the low beam lights of your Infiniti QX50. For most people these lights are well enough adjusted, and it seems that they light up enough at night. Sadly this is not automatically the case and checking out this setting, either because the low beams of your Infiniti QX50 are not lighting up well, or because you have the sense that they are too low or too strong is a good option .
Adjusting the low beam of your Infiniti QX50 for safety is a good option.
Firstly, the adjusting of the dipped headlights of an Infiniti QX50 must be done for a basic safety purpose. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. In contrast, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is as a consequence fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Infiniti QX50 for law justifications
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Infiniti QX50?
We will now go forward to the section that interests you the most in this article content, how to adjust the low beams of his Infiniti QX50? This setting may appear to be a bit complex, but if you stick to the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Infiniti QX50
Firstly, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Infiniti QX50
Once your vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Infiniti QX50 (they are commonly marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, verify that the low beam setting of your Infiniti QX50 is consistent on the road, do not be reluctant to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Infiniti QX50, please browse our article content on this subject.
If you wish more guides on the Infiniti QX50, go to our Infiniti QX50 category.
