Whether you feel you can’t see properly after dark, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your car to blame – your low beams. Even though this correction may seem simple thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this basic manipulation, and in this article, we will find out how to adjust the low beam lights of your Infiniti Q60? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Infiniti Q60.
Why set the low beam lights of your Infiniti Q60?
So let’s start our article with the advantage of adjusting the low beam lights of your Infiniti Q60. For a lot of people these lights are good enough adjusted, and it looks like that they light up enough at night. Sadly this is not constantly the case and verifying this setting, either because the low beams of your Infiniti Q60 are not illuminating well, or because you have the sense that they are too low or too strong is a wise decision .
Adjusting the low beam of your Infiniti Q60 for security is a wise decision.
To start, the adjusting of the dipped headlights of an Infiniti Q60 must be done for a elementary security reason. Whether it’s for you, or for the other drivers you come across during your night trips. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. On the other hand, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is consequently imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Infiniti Q60 for law justifications
Additionally to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Infiniti Q60?
We will now move on to the section that concerns you the most in this article, how to adjust the low beams of his Infiniti Q60? This setting may seem to be a bit complex, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Infiniti Q60
To start, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Infiniti Q60
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Infiniti Q60 (they are commonly marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, examine that the low beam setting of your Infiniti Q60 is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Infiniti Q60, please browse our article on this subject.
If you want more guides on the Infiniti Q60, go to our Infiniti Q60 category.
