Whether you feel you can’t see properly after dark, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your automobile to blame – your low beams. Despite the fact this correction may appear simple thanks to the thumbwheel on your dashboard, a complete correction is much more complex than this basic manipulation, and in this content, we will find out how to adjust the low beam lights of your Hyundai Veloster? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Hyundai Veloster.

set-low-beam-headlights-hyundai-veloster

Why set the low beam lights of your Hyundai Veloster?

So let’s begin our content with the point of adjusting the low beam lights of your Hyundai Veloster. For most people these lights are good enough adjusted, and it looks like that they light up enough at night. However this is not always the case and looking at this setting, either because the low beams of your Hyundai Veloster are not lighting up well, or because you have the sense that they are too low or too powerful is a wise decision .

Adjusting the low beam of your Hyundai Veloster for safety is a wise decision.

To start, the adjusting of the dipped headlights of an Hyundai Veloster must be done for a ordinary safety cause. Regardless it’s for you, or for the other drivers you come across during your night journeys. In reality, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is therefore imperative for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Hyundai Veloster for legal justifications

Moreover to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Hyundai Veloster?

We will now move on to the part that concerns you the more in this content, how to adjust the low beams of his Hyundai Veloster? This setting may seem a bit difficult, but if you stick to the recommendations you should be able to do it without too much difficulty.

Preparations to set the low beam of a Hyundai Veloster

First of all, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure carefully.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Hyundai Veloster

Once your automobile is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to stick to:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Hyundai Veloster (they are usually marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the low beam setting of your Hyundai Veloster is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Hyundai Veloster, please browse our content on this subject.

In the event that you have any further questions about the Hyundai Veloster, do not hesitate to consult our Hyundai Veloster category.