Regardless whether you feel you can’t see as well through the night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your vehicle to blame – your low beams. Despite the fact this adjustment may look simple thanks to the thumbwheel on your dashboard, a whole adjustment is much more complicated than this simple realignment, and in this article content, we will see how to adjust the low beam lights of your Hyundai Tucson? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Hyundai Tucson.
Why adjust the low beam lights of your Hyundai Tucson?
So let’s start our article content with the point of adjusting the low beam lights of your Hyundai Tucson. For many of us these lights are well enough adjusted, and it seems that they light up enough at night. However this is not constantly the case and checking out this setting, either because the low beams of your Hyundai Tucson are not illuminating well, or because you have the feeling that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Hyundai Tucson for security is a good plan.
To start, the adjusting of the dipped headlights of an Hyundai Tucson must be done for a ordinary security purpose. Regardless it’s for you, or for the other drivers you encounter during your night trips. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is consequently important for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Hyundai Tucson for legal motives
In addition to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Hyundai Tucson?
We will now go forward to the section that interests you the most in this article content, how to adjust the low beams of his Hyundai Tucson? This setting may seem to be a bit complicated, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Hyundai Tucson
First of all, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Hyundai Tucson
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the guidelines to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Hyundai Tucson (they are usually marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, examine that the low beam setting of your Hyundai Tucson is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Hyundai Tucson, please go through our article content on this subject.
Whenever you have any further questions about the Hyundai Tucson, do not hesitate to consult our Hyundai Tucson category.
