Whether you feel you can’t see properly during the night, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your vehicle to blame – your low beams. Although this adjustment may appear easy to do thanks to the thumbwheel on your dashboard, a full adjustment is much more technical than this basic realignment, and in this article, we will see how to adjust the low beam lights of your Hyundai Kona? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Hyundai Kona.
Why set the low beam lights of your Hyundai Kona?
So let’s begin our article with the advantage of adjusting the low beam lights of your Hyundai Kona. For most of us these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not constantly the case and checking out this setting, either because the low beams of your Hyundai Kona are not lighting up well, or because you have the feeling that they are too low or too powerful is a good plan .
Adjusting the low beam of your Hyundai Kona for security is a good plan.
To start, the adjusting of the dipped headlights of an Hyundai Kona must be done for a elementary security purpose. Whether it’s for you, or for the other users you come across during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is therefore essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Hyundai Kona for legal reasons
Moreover to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Hyundai Kona?
We will now move on to the part that interests you the most in this article, how to adjust the low beams of his Hyundai Kona? This setting may appear to be a bit complicated, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Hyundai Kona
Firstly, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Hyundai Kona
Once your vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Hyundai Kona (they are commonly marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Hyundai Kona is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Hyundai Kona, please read our article on this subject.
To get more tips on the Hyundai Kona, take a look at the Hyundai Kona category.
