It doesn’t matter if you feel you can’t see good enough after dark, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your car to blame – your low beams. Despite the fact this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic realignment, and in this article content, we will see how to adjust the low beam lights of your hyundai i10? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your hyundai i10.

set-low-beam-headlights-hyundai-i10

Why adjust the low beam lights of your hyundai i10?

So let’s begin our article content with the benefit of adjusting the low beam lights of your hyundai i10. For most people these lights are well enough adjusted, and it seems that they light up enough at night. However this is not always the case and examining this setting, either because the low beams of your hyundai i10 are not illuminating well, or because you have the feeling that they are too low or too strong is a good plan .

Adjusting the low beam of your hyundai i10 for safety is a good plan.

To start, the adjusting of the dipped headlights of an hyundai i10 must be done for a ordinary safety reason. Whether it’s for you, or for the other drivers you come across during your night journeys. In fact, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is as a consequence fundamental for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an hyundai i10 for legal justifications

In addition to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a hyundai i10?

We will now go forward to the part that interests you the more in this article content, how to adjust the low beams of his hyundai i10? This setting may appear to be a bit complex, but if you follow the recommendations you should be able to do it without too much problem.

Preparations to set the low beam of a hyundai i10

To start, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure precisely.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the car, only one person should be in the driver’s seat.

The setting of the low beam headlights of his hyundai i10

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your hyundai i10 (they are in most cases marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once complete, check that the low beam setting of your hyundai i10 is consistent on the road, do not hesitate to check that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your hyundai i10, please read our article content on this subject.

If you need more tutorials on the hyundai i10, go to our hyundai i10 category.