Whether you feel you can’t see properly during the night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your motor vehicle to blame – your low beams. Even though this correction may appear simple thanks to the thumbwheel on your dashboard, a full correction is much more complex than this simple manipulation, and in this content page, we will see how to adjust the low beam lights of your hyundai getz? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your hyundai getz.

set-low-beam-headlights-hyundai-getz

Why adjust the low beam lights of your hyundai getz?

So let’s start our content page with the point of adjusting the low beam lights of your hyundai getz. For many of us these lights are good enough adjusted, and it seems that they light up enough at night. Unfortunately this is not automatically the case and verifying this setting, either because the low beams of your hyundai getz are not lighting up well, or because you have the sense that they are too low or too strong is a good idea .

Adjusting the low beam of your hyundai getz for security is a good idea.

Firstly, the adjusting of the dipped headlights of an hyundai getz must be done for a ordinary security reason. It doesn’t matter if it’s for you, or for the other users you come across during your night journeys. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. In contrast, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is subsequently important for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an hyundai getz for law motives

In addition to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a hyundai getz?

We will now move on to the section that interests you the most in this content page, how to adjust the low beams of his hyundai getz? This setting may appear to be a bit complicated, but if you follow the instructions you should be able to do it without too much difficulty.

Preparations to set the low beam of a hyundai getz

Firstly, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure rigorously.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his hyundai getz

Once your motor vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your hyundai getz (they are commonly marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once done, verify that the low beam setting of your hyundai getz is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your hyundai getz, please go through our content page on this subject.

If you want more tutorials on the hyundai getz, go to our hyundai getz category.