Whether you feel you can’t see as well after dark, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your car to blame – your low beams. Even though this adjustment may seem to be easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this common realignment, and in this article content, we will see how to adjust the low beam lights of your Hyundai Bayon? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Hyundai Bayon.
Why adjust the low beam lights of your Hyundai Bayon?
So let’s start our article content with the interest of adjusting the low beam lights of your Hyundai Bayon. For most of us these lights are well enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not automatically the case and examining this setting, either because the low beams of your Hyundai Bayon are not illuminating well, or because you have the sense that they are too low or too powerful is a good plan .
Adjusting the low beam of your Hyundai Bayon for security is a good plan.
To start, the adjusting of the dipped headlights of an Hyundai Bayon must be done for a simple security reason. Whether it’s for you, or for the other drivers you encounter during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself in danger. It is as a consequence fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Hyundai Bayon for law motives
Moreover to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Hyundai Bayon?
We will now move on to the part that concerns you the most in this article content, how to adjust the low beams of his Hyundai Bayon? This setting may appear a bit complex, but if you follow the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Hyundai Bayon
Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Hyundai Bayon
Once your car is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the guidelines to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Hyundai Bayon (they are in general marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, verify that the low beam setting of your Hyundai Bayon is consistent on the road, do not hesitate to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Hyundai Bayon, please read our article content on this subject.
To find more tips on the Hyundai Bayon, take a look at the Hyundai Bayon category.
