Regardless whether you feel you can’t see as well at nighttime, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Despite the fact this adjustment may seem to be easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this common manipulation, and in this article, we will see how to adjust the low beam lights of your Hyundai Accent? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Hyundai Accent.

set-low-beam-headlights-hyundai-accent

Why adjust the low beam lights of your Hyundai Accent?

So let’s begin our article with the advantage of adjusting the low beam lights of your Hyundai Accent. For a lot of people these lights are good enough adjusted, and it seems that they light up enough at night. However this is not always the case and verifying this setting, either because the low beams of your Hyundai Accent are not illuminating well, or because you have the sense that they are too weak or too strong is a good plan .

Adjusting the low beam of your Hyundai Accent for security is a good plan.

First of all, the adjusting of the dipped headlights of an Hyundai Accent must be done for a basic security reason. It doesn’t matter if it’s for you, or for the other users you come across during your night journeys. In reality, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. On the contrary, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is subsequently crucial for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Hyundai Accent for law justifications

Additionally to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Hyundai Accent?

We will now go forward to the section that concerns you the most in this article, how to adjust the low beams of his Hyundai Accent? This setting may sound a bit complex, but if you follow the instructions you should be able to do it without too much difficulty.

Preparations to set the low beam of a Hyundai Accent

Firstly, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure precisely.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Hyundai Accent

Once your vehicle is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to follow:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Hyundai Accent (they are almost always marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once carried out, verify that the low beam setting of your Hyundai Accent is consistent on the road, do not be reluctant to verify that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Hyundai Accent, please examine our article on this subject.

To find more tips on the Hyundai Accent, take a look at the Hyundai Accent category.