Regardless whether you feel you can’t see good enough during the night, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Even though this correction may appear simple thanks to the thumbwheel on your dashboard, a complete correction is much more complicated than this basic realignment, and in this document, we will discover how to adjust the low beam lights of your Honda Ridgeline? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Honda Ridgeline.
Why set the low beam lights of your Honda Ridgeline?
So let’s start our document with the advantage of adjusting the low beam lights of your Honda Ridgeline. For most people these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not constantly the case and verifying this setting, either because the low beams of your Honda Ridgeline are not lighting up well, or because you have the feeling that they are too weak or too strong is a good idea .
Adjusting the low beam of your Honda Ridgeline for security is a good idea.
To begin, the adjusting of the dipped headlights of an Honda Ridgeline must be done for a basic security purpose. Regardless whether it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is consequently fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Honda Ridgeline for legal motives
Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Honda Ridgeline?
We will now move on to the section that interests you the more in this document, how to adjust the low beams of his Honda Ridgeline? This setting may appear a bit complex, but if you stick to the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Honda Ridgeline
Firstly, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Honda Ridgeline
Once your vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Honda Ridgeline (they are generally marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Honda Ridgeline is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Honda Ridgeline, please go through our document on this subject.
If you need more tutorials on the Honda Ridgeline, go to our Honda Ridgeline category.
