Regardless you feel you can’t see as well at night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your car to blame – your low beams. Even though this correction may appear easy thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this ordinary realignment, and in this document, we will discover how to adjust the low beam lights of your Honda Odyssey? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Honda Odyssey.

set-low-beam-headlights-honda-odyssey

Why adjust the low beam lights of your Honda Odyssey?

So let’s begin our document with the benefit of adjusting the low beam lights of your Honda Odyssey. For the majority of us these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not necessarily the case and examining this setting, either because the low beams of your Honda Odyssey are not lighting up well, or because you have the sense that they are too weak or too strong is a good plan .

Adjusting the low beam of your Honda Odyssey for security is a good plan.

First of all, the adjusting of the dipped headlights of an Honda Odyssey must be done for a elementary security cause. Whether it’s for you, or for the other drivers you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. On the flip side, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is as a consequence imperative for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Honda Odyssey for legal justifications

Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Honda Odyssey?

We will now move on to the section that interests you the most in this document, how to adjust the low beams of his Honda Odyssey? This setting may appear to be a bit complicated, but if you stick to the recommendations you should be able to do it without too much problem.

Preparations to set the low beam of a Honda Odyssey

To start, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure rigorously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the car, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Honda Odyssey

Once your car is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to stick to:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Honda Odyssey (they are usually marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the manipulation.
  • Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once accomplished, check that the low beam setting of your Honda Odyssey is consistent on the road, do not be reluctant to check that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Honda Odyssey, please examine our document on this subject.

Whenever you have any additional questions about the Honda Odyssey, do not hesitate to consult our Honda Odyssey category.