It doesn’t matter if you feel you can’t see good enough during the night, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your automobile to blame – your low beams. Despite the fact this adjustment may seem easy thanks to the thumbwheel on your dashboard, a full adjustment is much more technical than this ordinary realignment, and in this content, we will see how to adjust the low beam lights of your Honda Insight? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Honda Insight.
Why adjust the low beam lights of your Honda Insight?
So let’s begin our content with the advantage of adjusting the low beam lights of your Honda Insight. For most people these lights are good enough adjusted, and it looks like that they light up enough at night. Sadly this is not automatically the case and checking out this setting, either because the low beams of your Honda Insight are not lighting up well, or because you have the sense that they are too low or too powerful is a good option .
Adjusting the low beam of your Honda Insight for security is a good option.
Firstly, the adjusting of the dipped headlights of an Honda Insight must be done for a simple security purpose. Regardless it’s for you, or for the other drivers you encounter during your night journeys. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. In contrast, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is therefore essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Honda Insight for legal motives
Additionally to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Honda Insight?
We will now go forward to the section that concerns you the most in this content, how to adjust the low beams of his Honda Insight? This setting may sound a bit difficult, but if you stick to the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Honda Insight
Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Honda Insight
Once your automobile is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Honda Insight (they are usually marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, examine that the low beam setting of your Honda Insight is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Honda Insight, please browse our content on this subject.
If you want more guides on the Honda Insight, go to our Honda Insight category.
