It doesn’t matter if you feel you can’t see good enough after dark, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your vehicle to blame – your low beams. Even though this correction may look easy to do thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this common realignment, and in this content page, we will find out how to adjust the low beam lights of your Honda Element? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Honda Element.
Why set the low beam lights of your Honda Element?
So let’s start our content page with the point of adjusting the low beam lights of your Honda Element. For many of us these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not constantly the case and examining this setting, either because the low beams of your Honda Element are not lighting up well, or because you have the feeling that they are too low or too powerful is a good plan .
Adjusting the low beam of your Honda Element for security is a good plan.
Firstly, the adjusting of the dipped headlights of an Honda Element must be done for a basic security purpose. Regardless whether it’s for you, or for the other drivers you come across during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is therefore important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Honda Element for law motives
Additionally to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Honda Element?
We will now go forward to the part that interests you the more in this content page, how to adjust the low beams of his Honda Element? This setting may seem to be a bit complex, but if you stick to the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Honda Element
To start, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure rigorously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Honda Element
Once your vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Honda Element (they are generally marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, check that the low beam setting of your Honda Element is consistent on the road, do not be reluctant to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Honda Element, please examine our content page on this subject.
Whenever you have any further questions about the Honda Element, do not hesitate to consult our Honda Element category.
