Regardless whether you feel you can’t see good enough after dark, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your car to blame – your low beams. Even though this correction may look easy to do thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this ordinary modification, and in this content, we will discover how to adjust the low beam lights of your Honda CR V? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Honda CR V.
Why adjust the low beam lights of your Honda CR V?
So let’s start our content with the point of adjusting the low beam lights of your Honda CR V. For a lot of people these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not necessarily the case and examining this setting, either because the low beams of your Honda CR V are not lighting up well, or because you have the feeling that they are too weak or too strong is a good option .
Adjusting the low beam of your Honda CR V for safety is a good option.
To begin, the adjusting of the dipped headlights of an Honda CR V must be done for a basic safety reason. Regardless it’s for you, or for the other drivers you encounter during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is therefore important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Honda CR V for legal justifications
Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Honda CR V?
We will now go forward to the section that interests you the most in this content, how to adjust the low beams of his Honda CR V? This setting may seem a bit difficult, but if you stick to the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Honda CR V
Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Honda CR V
Once your car is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Honda CR V (they are in most cases marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, verify that the low beam setting of your Honda CR V is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Honda CR V, please browse our content on this subject.
To find more tips on the Honda CR V, take a look at the Honda CR V category.
