Regardless whether you feel you can’t see good enough at nighttime, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your automobile to blame – your low beams. Even though this adjustment may appear easy to do thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this common manipulation, and in this article content, we will find out how to adjust the low beam lights of your GMC Acadia? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your GMC Acadia.
Why adjust the low beam lights of your GMC Acadia?
So let’s begin our article content with the interest of adjusting the low beam lights of your GMC Acadia. For many of us these lights are good enough adjusted, and it seems that they light up enough at night. However this is not always the case and verifying this setting, either because the low beams of your GMC Acadia are not lighting up well, or because you have the feeling that they are too weak or too powerful is a good plan .
Adjusting the low beam of your GMC Acadia for security is a good plan.
Firstly, the adjusting of the dipped headlights of an GMC Acadia must be done for a elementary security purpose. Whether it’s for you, or for the other drivers you encounter during your night journeys. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. In contrast, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is subsequently necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an GMC Acadia for law justifications
Furthermore to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a GMC Acadia?
We will now move on to the section that concerns you the more in this article content, how to adjust the low beams of his GMC Acadia? This setting may appear a bit complicated, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a GMC Acadia
To start, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure precisely.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his GMC Acadia
Once your automobile is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the task here are the simple steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your GMC Acadia (they are commonly marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, verify that the low beam setting of your GMC Acadia is consistent on the road, do not hesitate to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your GMC Acadia, please go through our article content on this subject.
If perhaps you have any additional questions about the GMC Acadia, do not hesitate to consult our GMC Acadia category.
