Regardless whether you feel you can’t see as well at nighttime, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your motor vehicle to blame – your low beams. Although this adjustment may seem to be simple thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic modification, and in this content, we will see how to adjust the low beam lights of your Ford Transit Connect? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford Transit Connect.

set-low-beam-headlights-ford-transit-connect

Why adjust the low beam lights of your Ford Transit Connect?

So let’s start our content with the interest of adjusting the low beam lights of your Ford Transit Connect. For most of us these lights are well enough adjusted, and it seems that they light up enough at night. However this is not constantly the case and examining this setting, either because the low beams of your Ford Transit Connect are not lighting up well, or because you have the feeling that they are too weak or too powerful is a good plan .

Adjusting the low beam of your Ford Transit Connect for safety is a good plan.

Firstly, the adjusting of the dipped headlights of an Ford Transit Connect must be done for a elementary safety purpose. Regardless whether it’s for you, or for the other users you come across during your night journeys. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is consequently imperative for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Ford Transit Connect for legal justifications

In addition to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Ford Transit Connect?

We will now go forward to the section that concerns you the more in this content, how to adjust the low beams of his Ford Transit Connect? This setting may seem to be a bit complex, but if you follow the recommendations you should be able to do it without too much difficulty.

Preparations to set the low beam of a Ford Transit Connect

To start, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:

  • Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure carefully.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Ford Transit Connect

Once your motor vehicle is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Ford Transit Connect (they are commonly marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once carried out, verify that the low beam setting of your Ford Transit Connect is consistent on the road, do not hesitate to verify that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Ford Transit Connect, please browse our content on this subject.

To find more tips on the Ford Transit Connect, take a look at the Ford Transit Connect category.