Whether you feel you can’t see good enough at night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your automobile to blame – your low beams. Although this correction may look easy thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this simple modification, and in this content page, we will find out how to adjust the low beam lights of your Ford Tourneo? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford Tourneo.
Why adjust the low beam lights of your Ford Tourneo?
So let’s start our content page with the point of adjusting the low beam lights of your Ford Tourneo. For most of us these lights are well enough adjusted, and it seems that they light up enough at night. However this is not constantly the case and checking out this setting, either because the low beams of your Ford Tourneo are not lighting up well, or because you have the sense that they are too low or too strong is a good plan .
Adjusting the low beam of your Ford Tourneo for safety is a good plan.
Firstly, the adjusting of the dipped headlights of an Ford Tourneo must be done for a simple safety purpose. Whether it’s for you, or for the other users you encounter during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to anticipate a curve badly. On the other hand, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is as a consequence crucial for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Ford Tourneo for legal motives
Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford Tourneo?
We will now go forward to the section that interests you the more in this content page, how to adjust the low beams of his Ford Tourneo? This setting may sound a bit difficult, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Ford Tourneo
To start, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford Tourneo
Once your automobile is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the guidelines to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Ford Tourneo (they are generally marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, verify that the low beam setting of your Ford Tourneo is consistent on the road, do not be reluctant to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Ford Tourneo, please read our content page on this subject.
In the event that you have any further questions about the Ford Tourneo, do not hesitate to consult our Ford Tourneo category.
