Regardless you feel you can’t see good enough at night, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your car to blame – your low beams. Although this correction may seem to be easy thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this simple realignment, and in this article, we will discover how to adjust the low beam lights of your Ford S-max 2? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford S-max 2.
Why set the low beam lights of your Ford S-max 2?
So let’s start our article with the advantage of adjusting the low beam lights of your Ford S-max 2. For a lot of people these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not necessarily the case and examining this setting, either because the low beams of your Ford S-max 2 are not lighting up well, or because you have the sense that they are too low or too strong is a wise decision .
Adjusting the low beam of your Ford S-max 2 for security is a wise decision.
First of all, the adjusting of the dipped headlights of an Ford S-max 2 must be done for a elementary security reason. Regardless it’s for you, or for the other users you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Ford S-max 2 for legal motives
Moreover to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford S-max 2?
We will now move on to the part that concerns you the most in this article, how to adjust the low beams of his Ford S-max 2? This setting may appear a bit complex, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Ford S-max 2
Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford S-max 2
Once your car is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the task here are the guidelines to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Ford S-max 2 (they are almost always marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your Ford S-max 2 is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Ford S-max 2, please browse our article on this subject.
In the event that you have any further questions about the Ford S-max 2, do not hesitate to consult our Ford S-max 2 category.
