Whether you feel you can’t see properly through the night, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your car to blame – your low beams. Although this correction may appear easy to do thanks to the thumbwheel on your dashboard, a whole correction is much more complex than this simple modification, and in this article, we will see how to adjust the low beam lights of your Ford Puma? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford Puma.
Why adjust the low beam lights of your Ford Puma?
So let’s commence our article with the benefit of adjusting the low beam lights of your Ford Puma. For most people these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not constantly the case and checking out this setting, either because the low beams of your Ford Puma are not illuminating well, or because you have the sense that they are too weak or too powerful is a good option .
Adjusting the low beam of your Ford Puma for security is a good option.
First of all, the adjusting of the dipped headlights of an Ford Puma must be done for a simple security reason. It doesn’t matter if it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Ford Puma for legal reasons
Moreover to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford Puma?
We will now go forward to the part that concerns you the most in this article, how to adjust the low beams of his Ford Puma? This setting may seem a bit difficult, but if you follow the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Ford Puma
Firstly, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford Puma
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the guidelines to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Ford Puma (they are generally marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, verify that the low beam setting of your Ford Puma is consistent on the road, do not be reluctant to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Ford Puma, please go through our article on this subject.
If you want more tutorials on the Ford Puma, go to our Ford Puma category.
