It doesn’t matter if you feel you can’t see properly after dark, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your vehicle to blame – your low beams. Although this adjustment may look simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic realignment, and in this article, we will discover how to adjust the low beam lights of your Ford Mondeo 4? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford Mondeo 4.
Why adjust the low beam lights of your Ford Mondeo 4?
So let’s begin our article with the advantage of adjusting the low beam lights of your Ford Mondeo 4. For the majority of us these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not constantly the case and looking at this setting, either because the low beams of your Ford Mondeo 4 are not lighting up well, or because you have the sense that they are too weak or too powerful is a good option .
Adjusting the low beam of your Ford Mondeo 4 for security is a good option.
To start, the adjusting of the dipped headlights of an Ford Mondeo 4 must be done for a simple security cause. Regardless whether it’s for you, or for the other users you come across during your night trips. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Ford Mondeo 4 for legal motives
In addition to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford Mondeo 4?
We will now go forward to the part that concerns you the most in this article, how to adjust the low beams of his Ford Mondeo 4? This setting may seem to be a bit complex, but if you stick to the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Ford Mondeo 4
To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford Mondeo 4
Once your vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Ford Mondeo 4 (they are in most cases marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Ford Mondeo 4 is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Ford Mondeo 4, please read our article on this subject.
In the event that you have any additional questions about the Ford Mondeo 4, do not hesitate to consult our Ford Mondeo 4 category.
