Regardless whether you feel you can’t see as well through the night, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Even though this adjustment may seem simple thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this content page, we will discover how to adjust the low beam lights of your Ford Focus C-max? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford Focus C-max.
Why adjust the low beam lights of your Ford Focus C-max?
So let’s commence our content page with the interest of adjusting the low beam lights of your Ford Focus C-max. For most people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not constantly the case and looking at this setting, either because the low beams of your Ford Focus C-max are not lighting up well, or because you have the feeling that they are too low or too powerful is a good idea .
Adjusting the low beam of your Ford Focus C-max for safety is a good idea.
Firstly, the adjusting of the dipped headlights of an Ford Focus C-max must be done for a elementary safety reason. Regardless whether it’s for you, or for the other drivers you come across during your night journeys. In reality, if you don’t see enough, the real danger is to miss an obstacle on the road, or to anticipate a curve badly. In contrast, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is subsequently necessary for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Ford Focus C-max for legal reasons
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford Focus C-max?
We will now go forward to the section that interests you the more in this content page, how to adjust the low beams of his Ford Focus C-max? This setting may sound a bit difficult, but if you stick to the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Ford Focus C-max
To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford Focus C-max
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Ford Focus C-max (they are in most cases marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, verify that the low beam setting of your Ford Focus C-max is consistent on the road, do not hesitate to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Ford Focus C-max, please examine our content page on this subject.
If you need more guides on the Ford Focus C-max, go to our Ford Focus C-max category.
