It doesn’t matter if you feel you can’t see good enough at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your car to blame – your low beams. Despite the fact this adjustment may look simple thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this ordinary realignment, and in this document, we will see how to adjust the low beam lights of your Ford F 550? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford F 550.
Why adjust the low beam lights of your Ford F 550?
So let’s start our document with the benefit of adjusting the low beam lights of your Ford F 550. For most of us these lights are good enough adjusted, and it seems that they light up enough at night. However this is not always the case and checking out this setting, either because the low beams of your Ford F 550 are not illuminating well, or because you have the feeling that they are too low or too strong is a good option .
Adjusting the low beam of your Ford F 550 for safety is a good option.
To begin, the adjusting of the dipped headlights of an Ford F 550 must be done for a elementary safety purpose. It doesn’t matter if it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. Alternatively, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is therefore essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Ford F 550 for law motives
Additionally to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford F 550?
We will now go forward to the section that interests you the most in this document, how to adjust the low beams of his Ford F 550? This setting may seem to be a bit difficult, but if you stick to the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Ford F 550
First of all, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford F 550
Once your car is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Ford F 550 (they are generally marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, examine that the low beam setting of your Ford F 550 is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Ford F 550, please read our document on this subject.
Whenever you have any further questions about the Ford F 550, do not hesitate to consult our Ford F 550 category.
