Whether you feel you can’t see properly at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your motor vehicle to blame – your low beams. Although this correction may seem easy to do thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this common modification, and in this document, we will discover how to adjust the low beam lights of your Ford F 250? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford F 250.
Why set the low beam lights of your Ford F 250?
So let’s begin our document with the point of adjusting the low beam lights of your Ford F 250. For most of us these lights are well enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not automatically the case and verifying this setting, either because the low beams of your Ford F 250 are not illuminating well, or because you have the sense that they are too low or too strong is a wise decision .
Adjusting the low beam of your Ford F 250 for security is a wise decision.
To start, the adjusting of the dipped headlights of an Ford F 250 must be done for a elementary security cause. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. On the contrary, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is subsequently fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Ford F 250 for law motives
Furthermore to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford F 250?
We will now go forward to the section that interests you the more in this document, how to adjust the low beams of his Ford F 250? This setting may appear to be a bit complicated, but if you follow the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Ford F 250
Firstly, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford F 250
Once your motor vehicle is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Ford F 250 (they are almost always marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your Ford F 250 is consistent on the road, do not be reluctant to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Ford F 250, please read our document on this subject.
If you want more tutorials on the Ford F 250, go to our Ford F 250 category.
