Regardless whether you feel you can’t see good enough at nighttime, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your motor vehicle to blame – your low beams. Even though this correction may look easy to do thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this simple realignment, and in this article content, we will discover how to adjust the low beam lights of your Ford Escape? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford Escape.
Why adjust the low beam lights of your Ford Escape?
So let’s start our article content with the benefit of adjusting the low beam lights of your Ford Escape. For many of us these lights are good enough adjusted, and it seems that they light up enough at night. Unfortunately this is not necessarily the case and checking this setting, either because the low beams of your Ford Escape are not lighting up well, or because you have the sense that they are too weak or too strong is a good idea .
Adjusting the low beam of your Ford Escape for safety is a good idea.
To start, the adjusting of the dipped headlights of an Ford Escape must be done for a simple safety reason. Whether it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is subsequently essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Ford Escape for law motives
In addition to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford Escape?
We will now move on to the section that concerns you the most in this article content, how to adjust the low beams of his Ford Escape? This setting may appear to be a bit complicated, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Ford Escape
Firstly, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure precisely.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford Escape
Once your motor vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the simple steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Ford Escape (they are generally marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, examine that the low beam setting of your Ford Escape is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Ford Escape, please browse our article content on this subject.
If you need more guides on the Ford Escape, go to our Ford Escape category.
