Whether you feel you can’t see properly at night, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your vehicle to blame – your low beams. Although this adjustment may seem to be easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this ordinary manipulation, and in this content, we will see how to adjust the low beam lights of your Ford Crown Victoria? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford Crown Victoria.
Why adjust the low beam lights of your Ford Crown Victoria?
So let’s commence our content with the interest of adjusting the low beam lights of your Ford Crown Victoria. For most people these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not constantly the case and checking out this setting, either because the low beams of your Ford Crown Victoria are not lighting up well, or because you have the feeling that they are too low or too powerful is a good plan .
Adjusting the low beam of your Ford Crown Victoria for security is a good plan.
Firstly, the adjusting of the dipped headlights of an Ford Crown Victoria must be done for a basic security reason. Regardless whether it’s for you, or for the other drivers you encounter during your night trips. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself in danger. It is therefore fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Ford Crown Victoria for law reasons
Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford Crown Victoria?
We will now move on to the part that concerns you the most in this content, how to adjust the low beams of his Ford Crown Victoria? This setting may appear a bit complicated, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Ford Crown Victoria
First of all, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford Crown Victoria
Once your vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the guidelines to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Ford Crown Victoria (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, verify that the low beam setting of your Ford Crown Victoria is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Ford Crown Victoria, please read our content on this subject.
Whenever you have any further questions about the Ford Crown Victoria, do not hesitate to consult our Ford Crown Victoria category.
