Regardless you feel you can’t see good enough through the night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your car to blame – your low beams. Even though this correction may seem easy to do thanks to the thumbwheel on your dashboard, a complete correction is much more complicated than this basic modification, and in this content page, we will discover how to adjust the low beam lights of your Ford C Max? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford C Max.
Why adjust the low beam lights of your Ford C Max?
So let’s commence our content page with the benefit of adjusting the low beam lights of your Ford C Max. For most people these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not automatically the case and verifying this setting, either because the low beams of your Ford C Max are not lighting up well, or because you have the sense that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Ford C Max for security is a wise decision.
To begin, the adjusting of the dipped headlights of an Ford C Max must be done for a basic security reason. Whether it’s for you, or for the other drivers you encounter during your night trips. In fact, if you don’t see enough, the real danger is to miss an obstacle on the road, or to anticipate a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is subsequently important for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Ford C Max for legal motives
Furthermore to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford C Max?
We will now move on to the section that interests you the more in this content page, how to adjust the low beams of his Ford C Max? This setting may seem to be a bit difficult, but if you stick to the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Ford C Max
First of all, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford C Max
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Ford C Max (they are generally marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, check that the low beam setting of your Ford C Max is consistent on the road, do not be reluctant to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Ford C Max, please go through our content page on this subject.
If you want more tutorials on the Ford C Max, go to our Ford C Max category.
