Whether you feel you can’t see as well through the night, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your automobile to blame – your low beams. Even though this correction may look easy thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this simple realignment, and in this content page, we will see how to adjust the low beam lights of your Ford C-max 2? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford C-max 2.
Why adjust the low beam lights of your Ford C-max 2?
So let’s start our content page with the advantage of adjusting the low beam lights of your Ford C-max 2. For most of us these lights are well enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not automatically the case and examining this setting, either because the low beams of your Ford C-max 2 are not illuminating well, or because you have the feeling that they are too weak or too strong is a good idea .
Adjusting the low beam of your Ford C-max 2 for security is a good idea.
To begin, the adjusting of the dipped headlights of an Ford C-max 2 must be done for a elementary security reason. Regardless whether it’s for you, or for the other users you encounter during your night trips. In fact, if you don’t see enough, the real danger is to miss an obstacle on the route, or to predict a curve badly. In contrast, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is therefore imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Ford C-max 2 for legal justifications
Furthermore to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford C-max 2?
We will now go forward to the section that concerns you the most in this content page, how to adjust the low beams of his Ford C-max 2? This setting may sound a bit complex, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Ford C-max 2
To start, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford C-max 2
Once your automobile is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the task here are the simple steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Ford C-max 2 (they are commonly marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, check that the low beam setting of your Ford C-max 2 is consistent on the road, do not be reluctant to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Ford C-max 2, please read our content page on this subject.
If you want more guides on the Ford C-max 2, go to our Ford C-max 2 category.
