Whether you feel you can’t see good enough during the night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your automobile to blame – your low beams. Even though this adjustment may seem simple thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this common realignment, and in this content, we will see how to adjust the low beam lights of your Ford B-max? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford B-max.
Why adjust the low beam lights of your Ford B-max?
So let’s commence our content with the advantage of adjusting the low beam lights of your Ford B-max. For a lot of people these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not necessarily the case and looking at this setting, either because the low beams of your Ford B-max are not lighting up well, or because you have the sense that they are too low or too strong is a good idea .
Adjusting the low beam of your Ford B-max for security is a good idea.
First of all, the adjusting of the dipped headlights of an Ford B-max must be done for a elementary security cause. Whether it’s for you, or for the other users you encounter during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. However, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is subsequently fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Ford B-max for legal motives
Furthermore to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford B-max?
We will now go forward to the section that interests you the more in this content, how to adjust the low beams of his Ford B-max? This setting may sound a bit complex, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Ford B-max
First of all, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford B-max
Once your automobile is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the guidelines to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Ford B-max (they are commonly marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, check that the low beam setting of your Ford B-max is consistent on the road, do not be reluctant to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Ford B-max, please examine our content on this subject.
If you need more guides on the Ford B-max, go to our Ford B-max category.
