Whether you feel you can’t see good enough through the night, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your automobile to blame – your low beams. Although this correction may seem to be simple thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this common modification, and in this content, we will discover how to adjust the low beam lights of your Fiat Scudo? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Fiat Scudo.
Why set the low beam lights of your Fiat Scudo?
So let’s start our content with the point of adjusting the low beam lights of your Fiat Scudo. For the majority of us these lights are well enough adjusted, and it seems that they light up enough at night. Unfortunately this is not always the case and checking this setting, either because the low beams of your Fiat Scudo are not lighting up well, or because you have the sense that they are too low or too powerful is a good idea .
Adjusting the low beam of your Fiat Scudo for security is a good idea.
To start, the adjusting of the dipped headlights of an Fiat Scudo must be done for a basic security cause. It doesn’t matter if it’s for you, or for the other users you encounter during your night journeys. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is consequently imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Fiat Scudo for law justifications
Moreover to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Fiat Scudo?
We will now move on to the part that concerns you the most in this content, how to adjust the low beams of his Fiat Scudo? This setting may appear to be a bit complicated, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Fiat Scudo
First of all, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Fiat Scudo
Once your automobile is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Fiat Scudo (they are commonly marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, check that the low beam setting of your Fiat Scudo is consistent on the road, do not be reluctant to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Fiat Scudo, please browse our content on this subject.
In the event that you have any further questions about the Fiat Scudo, do not hesitate to consult our Fiat Scudo category.
