Regardless you feel you can’t see as well during the night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your automobile to blame – your low beams. Even though this correction may seem easy to do thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this common realignment, and in this content page, we will discover how to adjust the low beam lights of your Fiat Punto? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Fiat Punto.
Why set the low beam lights of your Fiat Punto?
So let’s begin our content page with the interest of adjusting the low beam lights of your Fiat Punto. For a lot of people these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not necessarily the case and examining this setting, either because the low beams of your Fiat Punto are not lighting up well, or because you have the sense that they are too low or too strong is a good option .
Adjusting the low beam of your Fiat Punto for security is a good option.
First of all, the adjusting of the dipped headlights of an Fiat Punto must be done for a basic security cause. Regardless whether it’s for you, or for the other drivers you encounter during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. On the contrary, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is therefore essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Fiat Punto for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Fiat Punto?
We will now move on to the section that interests you the more in this content page, how to adjust the low beams of his Fiat Punto? This setting may seem to be a bit complex, but if you follow the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Fiat Punto
First of all, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Fiat Punto
Once your automobile is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Fiat Punto (they are almost always marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, verify that the low beam setting of your Fiat Punto is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Fiat Punto, please examine our content page on this subject.
If you need more guides on the Fiat Punto, go to our Fiat Punto category.
