Regardless whether you feel you can’t see properly at night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your motor vehicle to blame – your low beams. Despite the fact this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this ordinary realignment, and in this content page, we will see how to adjust the low beam lights of your Fiat Punto Evo? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Fiat Punto Evo.
Why adjust the low beam lights of your Fiat Punto Evo?
So let’s commence our content page with the benefit of adjusting the low beam lights of your Fiat Punto Evo. For most people these lights are good enough adjusted, and it seems that they light up enough at night. However this is not constantly the case and checking out this setting, either because the low beams of your Fiat Punto Evo are not illuminating well, or because you have the sense that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Fiat Punto Evo for security is a good plan.
To begin, the adjusting of the dipped headlights of an Fiat Punto Evo must be done for a simple security purpose. Regardless it’s for you, or for the other drivers you encounter during your night trips. In reality, if you don’t see enough, the real danger is to miss an obstacle on the route, or to predict a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is as a consequence crucial for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Fiat Punto Evo for law justifications
Furthermore to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Fiat Punto Evo?
We will now move on to the part that interests you the more in this content page, how to adjust the low beams of his Fiat Punto Evo? This setting may appear a bit complex, but if you stick to the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Fiat Punto Evo
Firstly, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Fiat Punto Evo
Once your motor vehicle is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the guidelines to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Fiat Punto Evo (they are usually marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the low beam setting of your Fiat Punto Evo is consistent on the road, do not be reluctant to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Fiat Punto Evo, please read our content page on this subject.
If you want more guides on the Fiat Punto Evo, go to our Fiat Punto Evo category.
