It doesn’t matter if you feel you can’t see good enough at night, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your motor vehicle to blame – your low beams. Even though this adjustment may appear easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this common manipulation, and in this article, we will find out how to adjust the low beam lights of your Fiat Panda 3? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Fiat Panda 3.
Why adjust the low beam lights of your Fiat Panda 3?
So let’s start our article with the interest of adjusting the low beam lights of your Fiat Panda 3. For many people these lights are well enough adjusted, and it seems that they light up enough at night. However this is not necessarily the case and looking at this setting, either because the low beams of your Fiat Panda 3 are not illuminating well, or because you have the sense that they are too low or too powerful is a wise decision .
Adjusting the low beam of your Fiat Panda 3 for security is a wise decision.
To start, the adjusting of the dipped headlights of an Fiat Panda 3 must be done for a ordinary security reason. Regardless whether it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is subsequently imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Fiat Panda 3 for law reasons
Moreover to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Fiat Panda 3?
We will now go forward to the section that interests you the more in this article, how to adjust the low beams of his Fiat Panda 3? This setting may appear to be a bit difficult, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Fiat Panda 3
To start, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Fiat Panda 3
Once your motor vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the guidelines to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Fiat Panda 3 (they are generally marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, verify that the low beam setting of your Fiat Panda 3 is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Fiat Panda 3, please examine our article on this subject.
In the event that you have any additional questions about the Fiat Panda 3, do not hesitate to consult our Fiat Panda 3 category.
