Whether you feel you can’t see properly after dark, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your vehicle to blame – your low beams. Even though this adjustment may look simple thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this ordinary modification, and in this content page, we will see how to adjust the low beam lights of your Fiat Idea? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Fiat Idea.

set-low-beam-headlights-fiat-idea

Why adjust the low beam lights of your Fiat Idea?

So let’s begin our content page with the interest of adjusting the low beam lights of your Fiat Idea. For a lot of people these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not necessarily the case and looking at this setting, either because the low beams of your Fiat Idea are not illuminating well, or because you have the sense that they are too weak or too strong is a good idea .

Adjusting the low beam of your Fiat Idea for safety is a good idea.

Firstly, the adjusting of the dipped headlights of an Fiat Idea must be done for a simple safety cause. Whether it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. In contrast, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is subsequently essential for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Fiat Idea for law reasons

In addition to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Fiat Idea?

We will now move on to the section that concerns you the more in this content page, how to adjust the low beams of his Fiat Idea? This setting may sound a bit complex, but if you follow the instructions you should be able to do it without too much difficulty.

Preparations to set the low beam of a Fiat Idea

To start, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure rigorously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Fiat Idea

Once your vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to follow:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Fiat Idea (they are almost always marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the low beam setting of your Fiat Idea is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Fiat Idea, please go through our content page on this subject.

If you wish more guides on the Fiat Idea, go to our Fiat Idea category.