Regardless whether you feel you can’t see as well at night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your automobile to blame – your low beams. Even though this adjustment may seem to be easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this common realignment, and in this article content, we will discover how to adjust the low beam lights of your Fiat Doblo 2? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Fiat Doblo 2.

set-low-beam-headlights-fiat-doblo-2

Why set the low beam lights of your Fiat Doblo 2?

So let’s start our article content with the point of adjusting the low beam lights of your Fiat Doblo 2. For most of us these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not constantly the case and checking this setting, either because the low beams of your Fiat Doblo 2 are not lighting up well, or because you have the feeling that they are too low or too strong is a good option .

Adjusting the low beam of your Fiat Doblo 2 for security is a good option.

To begin, the adjusting of the dipped headlights of an Fiat Doblo 2 must be done for a elementary security reason. Regardless it’s for you, or for the other users you encounter during your night journeys. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is therefore crucial for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Fiat Doblo 2 for law motives

Moreover to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Fiat Doblo 2?

We will now move on to the part that concerns you the more in this article content, how to adjust the low beams of his Fiat Doblo 2? This setting may appear a bit difficult, but if you follow the instructions you should be able to do it without too much issue.

Preparations to set the low beam of a Fiat Doblo 2

To start, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure cautiously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Fiat Doblo 2

Once your automobile is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Fiat Doblo 2 (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once done, check that the low beam setting of your Fiat Doblo 2 is consistent on the road, do not be reluctant to check that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Fiat Doblo 2, please read our article content on this subject.

If you have any additional questions about the Fiat Doblo 2, do not hesitate to consult our Fiat Doblo 2 category.