It doesn’t matter if you feel you can’t see as well at nighttime, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your vehicle to blame – your low beams. Despite the fact this correction may seem to be easy thanks to the thumbwheel on your dashboard, a whole correction is much more complex than this ordinary manipulation, and in this article, we will see how to adjust the low beam lights of your Fiat Bravo? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Fiat Bravo.
Why adjust the low beam lights of your Fiat Bravo?
So let’s begin our article with the benefit of adjusting the low beam lights of your Fiat Bravo. For most people these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not always the case and verifying this setting, either because the low beams of your Fiat Bravo are not illuminating well, or because you have the sense that they are too low or too strong is a good option .
Adjusting the low beam of your Fiat Bravo for safety is a good option.
First of all, the adjusting of the dipped headlights of an Fiat Bravo must be done for a simple safety reason. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to anticipate a curve badly. However, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is therefore essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Fiat Bravo for law reasons
Additionally to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Fiat Bravo?
We will now go forward to the section that concerns you the most in this article, how to adjust the low beams of his Fiat Bravo? This setting may seem a bit difficult, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Fiat Bravo
Firstly, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Fiat Bravo
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the simple steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Fiat Bravo (they are in most cases marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, verify that the low beam setting of your Fiat Bravo is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Fiat Bravo, please read our article on this subject.
In the event that you have any additional questions about the Fiat Bravo, do not hesitate to consult our Fiat Bravo category.
