Regardless whether you feel you can’t see as well at nighttime, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Even though this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this ordinary manipulation, and in this article content, we will find out how to adjust the low beam lights of your Fiat 500? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Fiat 500.
Why set the low beam lights of your Fiat 500?
So let’s begin our article content with the interest of adjusting the low beam lights of your Fiat 500. For a lot of people these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not constantly the case and looking at this setting, either because the low beams of your Fiat 500 are not lighting up well, or because you have the sense that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Fiat 500 for security is a wise decision.
Firstly, the adjusting of the dipped headlights of an Fiat 500 must be done for a basic security reason. Regardless whether it’s for you, or for the other drivers you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is consequently fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Fiat 500 for legal justifications
Moreover to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Fiat 500?
We will now go forward to the section that interests you the more in this article content, how to adjust the low beams of his Fiat 500? This setting may appear to be a bit complex, but if you follow the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Fiat 500
Firstly, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Fiat 500
Once your vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Fiat 500 (they are generally marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Fiat 500 is consistent on the road, do not be reluctant to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Fiat 500, please go through our article content on this subject.
In the event that you have any additional questions about the Fiat 500, do not hesitate to consult our Fiat 500 category.
