Whether you feel you can’t see as well at night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your automobile to blame – your low beams. Even though this correction may seem to be simple thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this ordinary modification, and in this article content, we will find out how to adjust the low beam lights of your Ds Ds 5? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ds Ds 5.
Why set the low beam lights of your Ds Ds 5?
So let’s begin our article content with the interest of adjusting the low beam lights of your Ds Ds 5. For many of us these lights are well enough adjusted, and it seems that they light up enough at night. Sadly this is not constantly the case and checking out this setting, either because the low beams of your Ds Ds 5 are not illuminating well, or because you have the feeling that they are too weak or too powerful is a good idea .
Adjusting the low beam of your Ds Ds 5 for safety is a good idea.
Firstly, the adjusting of the dipped headlights of an Ds Ds 5 must be done for a basic safety reason. Regardless whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the road, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is subsequently crucial for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Ds Ds 5 for law justifications
Furthermore to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ds Ds 5?
We will now move on to the section that interests you the most in this article content, how to adjust the low beams of his Ds Ds 5? This setting may seem to be a bit complex, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Ds Ds 5
First of all, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ds Ds 5
Once your automobile is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Ds Ds 5 (they are in general marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, check that the low beam setting of your Ds Ds 5 is consistent on the road, do not be reluctant to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Ds Ds 5, please read our article content on this subject.
If you need more tutorials on the Ds Ds 5, go to our Ds Ds 5 category.
