It doesn’t matter if you feel you can’t see as well at nighttime, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your automobile to blame – your low beams. Despite the fact this adjustment may seem simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this basic manipulation, and in this content, we will find out how to adjust the low beam lights of your Dodge Nitro? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Dodge Nitro.
Why adjust the low beam lights of your Dodge Nitro?
So let’s commence our content with the advantage of adjusting the low beam lights of your Dodge Nitro. For many of us these lights are good enough adjusted, and it seems that they light up enough at night. Unfortunately this is not always the case and looking at this setting, either because the low beams of your Dodge Nitro are not lighting up well, or because you have the sense that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Dodge Nitro for security is a wise decision.
First of all, the adjusting of the dipped headlights of an Dodge Nitro must be done for a ordinary security cause. Regardless whether it’s for you, or for the other drivers you encounter during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. In contrast, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Dodge Nitro for law justifications
Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Dodge Nitro?
We will now go forward to the section that concerns you the more in this content, how to adjust the low beams of his Dodge Nitro? This setting may sound a bit complex, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Dodge Nitro
To start, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Dodge Nitro
Once your automobile is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the guidelines to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Dodge Nitro (they are commonly marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, check that the low beam setting of your Dodge Nitro is consistent on the road, do not hesitate to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Dodge Nitro, please go through our content on this subject.
If perhaps you have any additional questions about the Dodge Nitro, do not hesitate to consult our Dodge Nitro category.
