Whether you feel you can’t see properly through the night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your motor vehicle to blame – your low beams. Although this correction may seem to be easy thanks to the thumbwheel on your dashboard, a complete correction is much more complex than this common manipulation, and in this article, we will find out how to adjust the low beam lights of your Dodge Journey? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Dodge Journey.
Why set the low beam lights of your Dodge Journey?
So let’s commence our article with the point of adjusting the low beam lights of your Dodge Journey. For the majority of us these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not constantly the case and verifying this setting, either because the low beams of your Dodge Journey are not lighting up well, or because you have the feeling that they are too low or too strong is a good option .
Adjusting the low beam of your Dodge Journey for safety is a good option.
To start, the adjusting of the dipped headlights of an Dodge Journey must be done for a basic safety cause. Whether it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to miss an obstacle on the route, or to predict a curve badly. Alternatively, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is therefore imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Dodge Journey for legal justifications
Moreover to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Dodge Journey?
We will now go forward to the section that concerns you the more in this article, how to adjust the low beams of his Dodge Journey? This setting may appear a bit complicated, but if you stick to the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Dodge Journey
Firstly, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Dodge Journey
Once your motor vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Dodge Journey (they are generally marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, verify that the low beam setting of your Dodge Journey is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Dodge Journey, please examine our article on this subject.
If you have any additional questions about the Dodge Journey, do not hesitate to consult our Dodge Journey category.
