It doesn’t matter if you feel you can’t see good enough at night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your car to blame – your low beams. Although this correction may look simple thanks to the thumbwheel on your dashboard, a whole correction is much more complex than this basic manipulation, and in this content page, we will discover how to adjust the low beam lights of your Dodge Dart? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Dodge Dart.

set-low-beam-headlights-dodge-dart

Why set the low beam lights of your Dodge Dart?

So let’s commence our content page with the benefit of adjusting the low beam lights of your Dodge Dart. For most people these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not necessarily the case and verifying this setting, either because the low beams of your Dodge Dart are not lighting up well, or because you have the sense that they are too weak or too powerful is a good idea .

Adjusting the low beam of your Dodge Dart for safety is a good idea.

Firstly, the adjusting of the dipped headlights of an Dodge Dart must be done for a elementary safety purpose. Regardless whether it’s for you, or for the other drivers you come across during your night journeys. Indeed, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence essential for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Dodge Dart for legal motives

Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Dodge Dart?

We will now move on to the section that interests you the most in this content page, how to adjust the low beams of his Dodge Dart? This setting may seem to be a bit difficult, but if you follow the guidelines you should be able to do it without too much problem.

Preparations to set the low beam of a Dodge Dart

Firstly, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure rigorously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the car, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Dodge Dart

Once your car is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Dodge Dart (they are in general marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
  • Use a cloth or anything else to hide the light on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once carried out, check that the low beam setting of your Dodge Dart is consistent on the road, do not hesitate to check that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Dodge Dart, please examine our content page on this subject.

If perhaps you have any additional questions about the Dodge Dart, do not hesitate to consult our Dodge Dart category.