Regardless whether you feel you can’t see as well at night, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your motor vehicle to blame – your low beams. Despite the fact this adjustment may seem to be simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this ordinary modification, and in this content page, we will discover how to adjust the low beam lights of your Dodge Charger? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Dodge Charger.
Why set the low beam lights of your Dodge Charger?
So let’s commence our content page with the point of adjusting the low beam lights of your Dodge Charger. For most of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not automatically the case and examining this setting, either because the low beams of your Dodge Charger are not illuminating well, or because you have the sense that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Dodge Charger for safety is a good plan.
First of all, the adjusting of the dipped headlights of an Dodge Charger must be done for a simple safety purpose. Regardless it’s for you, or for the other drivers you encounter during your night journeys. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to anticipate a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is consequently crucial for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Dodge Charger for legal reasons
In addition to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Dodge Charger?
We will now go forward to the part that interests you the most in this content page, how to adjust the low beams of his Dodge Charger? This setting may seem to be a bit complex, but if you stick to the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Dodge Charger
Firstly, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Dodge Charger
Once your motor vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the guidelines to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Dodge Charger (they are in general marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, check that the low beam setting of your Dodge Charger is consistent on the road, do not be reluctant to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Dodge Charger, please read our content page on this subject.
Whenever you have any additional questions about the Dodge Charger, do not hesitate to consult our Dodge Charger category.
