It doesn’t matter if you feel you can’t see properly during the night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your car to blame – your low beams. Although this adjustment may appear easy to do thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this ordinary manipulation, and in this article, we will discover how to adjust the low beam lights of your Dodge Caliber? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Dodge Caliber.
Why set the low beam lights of your Dodge Caliber?
So let’s commence our article with the benefit of adjusting the low beam lights of your Dodge Caliber. For most people these lights are good enough adjusted, and it looks like that they light up enough at night. However this is not always the case and verifying this setting, either because the low beams of your Dodge Caliber are not illuminating well, or because you have the feeling that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Dodge Caliber for safety is a wise decision.
First of all, the adjusting of the dipped headlights of an Dodge Caliber must be done for a elementary safety cause. Regardless whether it’s for you, or for the other drivers you come across during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Dodge Caliber for legal justifications
Furthermore to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Dodge Caliber?
We will now go forward to the part that concerns you the more in this article, how to adjust the low beams of his Dodge Caliber? This setting may seem a bit difficult, but if you follow the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Dodge Caliber
To start, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Dodge Caliber
Once your car is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the basic steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Dodge Caliber (they are generally marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, examine that the low beam setting of your Dodge Caliber is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Dodge Caliber, please browse our article on this subject.
To find more tips on the Dodge Caliber, take a look at the Dodge Caliber category.
