Regardless whether you feel you can’t see properly at night, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your automobile to blame – your low beams. Although this adjustment may look easy to do thanks to the thumbwheel on your dashboard, a full adjustment is much more technical than this ordinary manipulation, and in this content, we will find out how to adjust the low beam lights of your Dacia Sandero 2? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Dacia Sandero 2.

set-low-beam-headlights-dacia-sandero-2

Why adjust the low beam lights of your Dacia Sandero 2?

So let’s begin our content with the advantage of adjusting the low beam lights of your Dacia Sandero 2. For the majority of us these lights are well enough adjusted, and it seems that they light up enough at night. However this is not automatically the case and looking at this setting, either because the low beams of your Dacia Sandero 2 are not illuminating well, or because you have the feeling that they are too low or too powerful is a wise decision .

Adjusting the low beam of your Dacia Sandero 2 for safety is a wise decision.

To begin, the adjusting of the dipped headlights of an Dacia Sandero 2 must be done for a ordinary safety reason. It doesn’t matter if it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is as a consequence essential for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Dacia Sandero 2 for legal reasons

Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Dacia Sandero 2?

We will now move on to the part that interests you the more in this content, how to adjust the low beams of his Dacia Sandero 2? This setting may appear to be a bit difficult, but if you follow the guidelines you should be able to do it without too much difficulty.

Preparations to set the low beam of a Dacia Sandero 2

To start, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure cautiously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Dacia Sandero 2

Once your automobile is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Dacia Sandero 2 (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or anything else to hide the light on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once complete, check that the low beam setting of your Dacia Sandero 2 is consistent on the road, do not be reluctant to check that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Dacia Sandero 2, please read our content on this subject.

To get more tips on the Dacia Sandero 2, take a look at the Dacia Sandero 2 category.