Regardless you feel you can’t see as well through the night, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your vehicle to blame – your low beams. Although this adjustment may look easy to do thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this simple manipulation, and in this content, we will find out how to adjust the low beam lights of your Dacia Dokker? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Dacia Dokker.

set-low-beam-headlights-dacia-dokker

Why adjust the low beam lights of your Dacia Dokker?

So let’s commence our content with the advantage of adjusting the low beam lights of your Dacia Dokker. For a lot of people these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not constantly the case and checking this setting, either because the low beams of your Dacia Dokker are not lighting up well, or because you have the feeling that they are too low or too powerful is a good plan .

Adjusting the low beam of your Dacia Dokker for security is a good plan.

To begin, the adjusting of the dipped headlights of an Dacia Dokker must be done for a ordinary security reason. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night trips. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is therefore important for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Dacia Dokker for legal motives

In addition to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Dacia Dokker?

We will now move on to the part that concerns you the most in this content, how to adjust the low beams of his Dacia Dokker? This setting may seem a bit difficult, but if you follow the recommendations you should be able to do it without too much problem.

Preparations to set the low beam of a Dacia Dokker

Firstly, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:

  • Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure carefully.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Dacia Dokker

Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Dacia Dokker (they are in most cases marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
  • Use a cloth or anything else to hide the light on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once accomplished, verify that the low beam setting of your Dacia Dokker is consistent on the road, do not hesitate to verify that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Dacia Dokker, please browse our content on this subject.

To discover more tips on the Dacia Dokker, take a look at the Dacia Dokker category.