It doesn’t matter if you feel you can’t see properly at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your motor vehicle to blame – your low beams. Despite the fact this adjustment may appear simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this common modification, and in this document, we will discover how to adjust the low beam lights of your Citroen C3 Pluriel? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Citroen C3 Pluriel.

set-low-beam-headlights-citroen-c3-pluriel

Why adjust the low beam lights of your Citroen C3 Pluriel?

So let’s commence our document with the advantage of adjusting the low beam lights of your Citroen C3 Pluriel. For a lot of people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not constantly the case and verifying this setting, either because the low beams of your Citroen C3 Pluriel are not lighting up well, or because you have the feeling that they are too weak or too powerful is a good option .

Adjusting the low beam of your Citroen C3 Pluriel for security is a good option.

To start, the adjusting of the dipped headlights of an Citroen C3 Pluriel must be done for a simple security purpose. It doesn’t matter if it’s for you, or for the other users you come across during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself in danger. It is therefore necessary for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Citroen C3 Pluriel for legal reasons

Additionally to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Citroen C3 Pluriel?

We will now move on to the section that concerns you the more in this document, how to adjust the low beams of his Citroen C3 Pluriel? This setting may appear to be a bit difficult, but if you stick to the instructions you should be able to do it without too much difficulty.

Preparations to set the low beam of a Citroen C3 Pluriel

First of all, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure cautiously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Citroen C3 Pluriel

Once your motor vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to stick to:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Citroen C3 Pluriel (they are usually marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once done, check that the low beam setting of your Citroen C3 Pluriel is consistent on the road, do not hesitate to check that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Citroen C3 Pluriel, please go through our document on this subject.

To get more tips on the Citroen C3 Pluriel, take a look at the Citroen C3 Pluriel category.