Regardless you feel you can’t see as well at nighttime, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your automobile to blame – your low beams. Even though this correction may seem easy thanks to the thumbwheel on your dashboard, a full correction is much more complex than this common manipulation, and in this content page, we will see how to adjust the low beam lights of your Citroen C1? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Citroen C1.
Why adjust the low beam lights of your Citroen C1?
So let’s begin our content page with the interest of adjusting the low beam lights of your Citroen C1. For the majority of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. Sadly this is not always the case and verifying this setting, either because the low beams of your Citroen C1 are not illuminating well, or because you have the sense that they are too weak or too strong is a good option .
Adjusting the low beam of your Citroen C1 for safety is a good option.
To start, the adjusting of the dipped headlights of an Citroen C1 must be done for a elementary safety reason. Whether it’s for you, or for the other drivers you come across during your night journeys. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. On the flip side, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is subsequently imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Citroen C1 for law reasons
Moreover to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Citroen C1?
We will now move on to the part that interests you the most in this content page, how to adjust the low beams of his Citroen C1? This setting may seem a bit difficult, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Citroen C1
To start, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Citroen C1
Once your automobile is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Citroen C1 (they are generally marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your Citroen C1 is consistent on the road, do not be reluctant to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Citroen C1, please read our content page on this subject.
If you need more tutorials on the Citroen C1, go to our Citroen C1 category.
