It doesn’t matter if you feel you can’t see properly at night, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your motor vehicle to blame – your low beams. Although this correction may seem easy to do thanks to the thumbwheel on your dashboard, a whole correction is much more complex than this common manipulation, and in this document, we will discover how to adjust the low beam lights of your Citroen C-crosser? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Citroen C-crosser.
Why set the low beam lights of your Citroen C-crosser?
So let’s begin our document with the advantage of adjusting the low beam lights of your Citroen C-crosser. For many people these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not always the case and checking out this setting, either because the low beams of your Citroen C-crosser are not illuminating well, or because you have the sense that they are too weak or too strong is a good plan .
Adjusting the low beam of your Citroen C-crosser for security is a good plan.
To start, the adjusting of the dipped headlights of an Citroen C-crosser must be done for a basic security cause. Regardless it’s for you, or for the other drivers you encounter during your night trips. In fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is consequently important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Citroen C-crosser for law justifications
Moreover to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Citroen C-crosser?
We will now go forward to the part that interests you the most in this document, how to adjust the low beams of his Citroen C-crosser? This setting may appear a bit complicated, but if you follow the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Citroen C-crosser
To start, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Citroen C-crosser
Once your motor vehicle is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Citroen C-crosser (they are almost always marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the low beam setting of your Citroen C-crosser is consistent on the road, do not hesitate to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Citroen C-crosser, please browse our document on this subject.
To discover more tips on the Citroen C-crosser, take a look at the Citroen C-crosser category.
