Regardless you feel you can’t see as well through the night, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your motor vehicle to blame – your low beams. Despite the fact this correction may appear easy to do thanks to the thumbwheel on your dashboard, a full correction is much more complex than this common manipulation, and in this content, we will discover how to adjust the low beam lights of your Chrysler Town & Country? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chrysler Town & Country.

set-low-beam-headlights-chrysler-town-&-country

Why set the low beam lights of your Chrysler Town & Country?

So let’s start our content with the point of adjusting the low beam lights of your Chrysler Town & Country. For most of us these lights are well enough adjusted, and it seems that they light up enough at night. Sadly this is not automatically the case and verifying this setting, either because the low beams of your Chrysler Town & Country are not illuminating well, or because you have the sense that they are too weak or too strong is a good option .

Adjusting the low beam of your Chrysler Town & Country for safety is a good option.

To begin, the adjusting of the dipped headlights of an Chrysler Town & Country must be done for a basic safety cause. Regardless it’s for you, or for the other users you encounter during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is as a consequence necessary for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Chrysler Town & Country for law reasons

Moreover to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Chrysler Town & Country?

We will now go forward to the section that concerns you the more in this content, how to adjust the low beams of his Chrysler Town & Country? This setting may appear a bit difficult, but if you stick to the recommendations you should be able to do it without too much issue.

Preparations to set the low beam of a Chrysler Town & Country

First of all, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure rigorously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Chrysler Town & Country

Once your motor vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to stick to:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Chrysler Town & Country (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once done, examine that the low beam setting of your Chrysler Town & Country is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Chrysler Town & Country, please go through our content on this subject.

If perhaps you have any further questions about the Chrysler Town & Country, do not hesitate to consult our Chrysler Town & Country category.