Whether you feel you can’t see as well at nighttime, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your car to blame – your low beams. Even though this adjustment may appear simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this simple modification, and in this content, we will discover how to adjust the low beam lights of your Chrysler Sebring? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chrysler Sebring.
Why adjust the low beam lights of your Chrysler Sebring?
So let’s begin our content with the interest of adjusting the low beam lights of your Chrysler Sebring. For the majority of us these lights are good enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not always the case and checking this setting, either because the low beams of your Chrysler Sebring are not lighting up well, or because you have the feeling that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Chrysler Sebring for security is a wise decision.
First of all, the adjusting of the dipped headlights of an Chrysler Sebring must be done for a simple security cause. Regardless whether it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is subsequently imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Chrysler Sebring for legal motives
Furthermore to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Chrysler Sebring?
We will now go forward to the part that interests you the most in this content, how to adjust the low beams of his Chrysler Sebring? This setting may sound a bit complex, but if you follow the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Chrysler Sebring
To start, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Chrysler Sebring
Once your car is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the task here are the simple steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Chrysler Sebring (they are almost always marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your Chrysler Sebring is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Chrysler Sebring, please go through our content on this subject.
If perhaps you have any further questions about the Chrysler Sebring, do not hesitate to consult our Chrysler Sebring category.
