Regardless you feel you can’t see properly during the night, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your vehicle to blame – your low beams. Even though this correction may seem easy thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this common modification, and in this content, we will find out how to adjust the low beam lights of your Chrysler 200? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chrysler 200.
Why adjust the low beam lights of your Chrysler 200?
So let’s begin our content with the advantage of adjusting the low beam lights of your Chrysler 200. For most people these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not necessarily the case and looking at this setting, either because the low beams of your Chrysler 200 are not lighting up well, or because you have the sense that they are too weak or too powerful is a good option .
Adjusting the low beam of your Chrysler 200 for security is a good option.
Firstly, the adjusting of the dipped headlights of an Chrysler 200 must be done for a basic security purpose. Whether it’s for you, or for the other drivers you encounter during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is subsequently essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Chrysler 200 for law motives
Moreover to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Chrysler 200?
We will now go forward to the part that interests you the most in this content, how to adjust the low beams of his Chrysler 200? This setting may sound a bit complex, but if you stick to the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Chrysler 200
Firstly, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Chrysler 200
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Chrysler 200 (they are usually marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your Chrysler 200 is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Chrysler 200, please read our content on this subject.
If you have any further questions about the Chrysler 200, do not hesitate to consult our Chrysler 200 category.
